Engine alignment

Did a little bit of work on the MZW11 on Sunday. I have to redo the gearbox mount though, it needs to shift 20mm forward (better for the balance too!), clearance from the firewall has become noticeable when both mounts are tightened up correctly.

Supercharger lid just fits, will need to space it 10mm up to clear the 1MZ plenum.

Trimmed and reshaped the firewall a bit to give the plenum a bit more room if the motor rocks a bit under torque.

Should have around 15-20mm of clearance with the gearbox mount redone to the correct position.