Budget Engine Mount Repairs

Well after Mount Rapage, I decided to follow an old back yard method for beefing up engine mounts, by adding sikaflex (Urethane) to fill in the gaps and strengthen them up.

So I picked up the items.

Sikaflex, acetone and wax n grease remover.

Use the wax n grease remover to clean the mounts thoroughly.

Now pack the gaps in the mount full of sikaflex

Use a paint brush dipped in acetone and smooth the sikaflex out and push as much air out it as possible.

Now just wait 3-4 days for the sikaflex to cure and harden correctly, then throw it back into the car 😀