While waiting for filler to harden, I moved onto building a cold air intake. This is only like 3 years over due, but it’s happened none the less….

I used glass filler to mount a pod filter adaptor into the monster air scoop.

Which has some flex hose going to my ebay pod filter enclosure.

There will be a 45 degree silicon hose to go between the pod enclosure and the intake plenum, since I require a 3″ to 2.75″ reduction.
The enclosure will also be mounted off the gearbox using some aluminium supports that I’ll make up shortly.

Just a couple more things like a new battery clamp, coolant filler mount, a tidy up on random wires/hoses and the engine bay will look something close to clean….