I needed to get some new weapon bars cut as the old ones are a little worn, I decided that I could make them larger for the same weight with a little bit of a design tweak. This will allow more gearing, less weapon rpm (so more bite) and more kinetic energy.

The new bars have a diameter of 300mm, are 16mm thick, have two usable sides to get double the weapon life and now feature a hex whole make it easier to replace them. The Bamboozle smashed out these parts in under under 3hrs!

With the increase in bar diameter, it means the up rights needed modified. This is a dodgy for now, but will help get it dialed in for the final part.

Comparison to the old 250mm bar.

A quick mock up of it all.

Till next time…